CABINETRY REQUIREMENTS IMPORTANT INFORMATION

Please note... All granite countertops are designed to sit on top of the cabinet carcase and all doors hould be the full height of the cabinet.

THICKNESS:

Granite slabs are 20mm +/- 1mm (19-21mm) in thickness.

EDGE DETAIL:

Standard granite edge details are:

40mm Square
40mm Bullnose
20mm Square
20mm Round

UNDERSTRIP:

All 40mm edges will have a granite under strip of 65mm (as per detail below) A fee of $385 Inc GST will be charged to cut back the under strip to 35mm to rectify the problem of doors being dropped down.

PACKER:

GBD will pack up kitchen carcase with 42x20 MDF to affix granite (as per detail below).

DOORS:

DO NOT DROP DOWN DOORS MORE THAN 5mm…

RAILS:

All rails shall be installed on edge… (THIS IS VERY IMPORTANT ON THE SINK AND HOTPLATE CABINETS) GBD will fit stone to cabinets with rails fitted on the flat, but our product will not be guaranteed. Extra costs will be charged to the client to cut out rails on site.

BREAKFAST BAR:

If the client is having a 40mm edge detail it is advised that the panels fitted to the rear of island cabinets are extended 20mm above carcase otherwise MDF packers will be seen.

TEMPLATES:

Once cabinets are installed GBD will pick-up and check, or manufacture templates. Cabinetry will also be checked at this point.

CABINETS MUST BE FLAT OTHERWISE GRANITE
WILL NOT BE INSTALLED